Italiano English
Home/Prodotti/Accessories&Connectors
 
Power supply cable for GK-WFCOM2-0002
MD4 HOUSING FOR OFF ROAD FATBAR
BINDER FEMALE 4 PIN CONNECTOR
BINDER FEMALE 5 PIN CONNECTOR
BINDER MALE 5 PIN CONNECTOR
DTM MALE 2 PIN CONNECTOR
DTM MALE 4 PIN CONNECTOR
DTM FEMALE 4 PIN CONNECTOR
DTM FEMALE 3 PIN CONNECTOR
DTM MALE 3 PIN CONNECTOR
AUTOSPORT MALE 6 PIN CONNECTOR
AUTOSPORT FEMALE 5 PIN CONNECTOR
AUTOSPORT FEMALE 6 PIN CONNECTOR
AUTOSPORT MALE 5 PIN CONNECTOR
Connector : Autosport Female 55 pin connector
MD4 DASHBOARD KIT WITH REAR CONNECTORS, GPS ANTENNA, USB CBLE, POWER LOOM,MANUAL, MX2 SOFTWARE
MD4 POWER KIT (BATTERY + CHARGER)
Fatbar housing: fatbar housing for: MD5W, MD6W, MD60LOG, VT1.
Standard Bar Housing: Standard bar housing for: MD5W, MD6W, MD60LOG, VT1
Suction cup mount: suction cup support for MD6W, MD60LOG
LC1 LAMBDA KIT INCLUDING HARNESS AND CONDITIONING (ONLY WITH PRO EXPANSION CABLE)
MINI USB CABLE FOR MD4
POWER LOOM FOR MD4
EXPANSION LOOM FOR MD4 (FOR ANALOG INPUT CONNECTION)
CAN LOOM FOR MD4
POWER LOOM FOR MD4 WITH BINDER CONNECTOR FOR AUXILIARY BATTERY
12-5V TENSION ADAPTER CABLE FOR ANALOG SIGNAL MD4
LINEAR POTENTIOMETER 75 MM BINDER FOR MD4 + 12-5v TENSION ADAPTER CABLE FOR ANALOG SIGNALS MD4
LINEAR POTENTIOMETER 100 MM BINDER FOR MD4 + 12-5v TENSION ADAPTER CABLE FOR ANALOG SIGNALS MD4

LINEAR POTENTIOMETER 150 MM BINDER FOR MD4 + 12-5v TENSION ADAPTER CABLE FOR ANALOG SIGNALS MD4
Position sensor: Magnetostrictive Suspension Sensor 75 mm (Carbon Case) Binder for MD4
Position sensor: Magnetostrictive Suspension Sensor 150 mm (Carbon Case) Binder for MD3
SUSPENSION MAGNETOSTRICTIVE TRANDUCER (CARBON CASE) BINDER MM 350 FOR MD4
NTC TEMPERATURE SENSOR BINDER 6MA FOR MD4 + 12-5V TENSION ADAPTER CABLE FOR ANALOG SIGNALS MD4
PROXIMITY SENSOR FOR WHEEL SPEED BINDER FOR MD4
Lambda Lsu 4.2 sensor
PRESSURE SENSOR UP TO 10 BAR BINDER FOR MD4 + 12-5v TENSION ADAPTER CABLE FOR ANALOG SIGNALS MD4
PRESSURE SENSOR UP TO 35 BAR BINDER FOR MD4 + 12-5v TENSION ADAPTER CABLE FOR ANALOG SIGNALS MD4
PRESSURE SENSOR UP TO 100 BAR BINDER FOR MD4 + 12-5v TENSION ADAPTER CABLE FOR ANALOG SIGNALS MD4
RPM interface: RPM interface for vehicles with digital out for dash RPM meter
RPM interface: RPM interface with Signal Filter and Binder Connector for offroad icarburettor bikes (flywheel with less than 10 tooth)
RPM interface: RPM interface with Signal Filter and Binder Connector for offroad injection bikes (flywheel with more than 10 tooth)
RPM interface: RPM interface with Signal Filter for 2 and 4 stroke Engines
TPS INTERFACE BINDER WITH SIGNAL FILTER FOR MD4 (ROAD OR OFFROAD, CARBURETTOR OR INJECTION MOTORBIKES)
K-TYPE THERMOCOUPLE SENSOR BINDER + CONDITIONING FOR MD4
Proximity sensor: inductive sensor to capture wheel speed (installation on GP1 EVO requires PRO expansion cable)
Position sensor: Magnetostrictive Suspension Sensor 75 mm (Carbon Case) Binder for MD3 (dS40010010 included)
Magnetostrictive Tranducer Suspension Sensor 350 mm (Carbon Case) Binder for M40
Temperature sensor: NTC Temperature sensor with Binder connector - body thread 6MA- for MD3-M40
LC-GPA - MODE BUTTON
MAP 1-2 Switch: electronic map selector with led indicator
GPA Firmware Upgrade: firmware upgrade that enables the GPA strategy on GP1 EVO up to Year 2011
MAYA License Upgrade: Upgrade from EVO license to Advanced (USB KEY)
LC1-EVO Lambda kit: With its light weight and small size, it fits easily on your racing motorbike. The LC1-EVO is an electronic device that measures the proportion of oxygen in the exhaust gas. A mandatory tool for checking the air/fuel ratio, best combustion and as a result maximum power.
LC-GPA - RX1 ECU (KAW. 450/250 & SUZ. 450)
LC-GPA - RX1 ECU (ALL KTM/HUSQ. & YAM. 250)
LC-GPA - RX1 ECU (ALL HONDA & YAM. 450 & SUZ. 250)
Mount for GP1 EVO for Suzuki 450 13-14
Mount for GP1 EVO for Suzuki 250 13-14
Mount for GP1 EVO for Yamaha YZF 250/450 14
Support bracket for RX1 ECU CRF450 R 2017
Mount for GP1 EVO for Kawasaki 250/450 09-14
GPI (GET Power Interface): USB programming cable for GET POWER ECU's
GPI (GET Power Interface): USB programming cable for GET ECUJ5 ECU's
GP1 EVO programming kit Stage 1: GP1 EVO ECU programming kit. It includes: necessary looms, VT1 programmer, LC1 EVO lambda kit.
GP1 EVO programming kit Stage 2: GP1 EVO ECU programming kit. It includes: necessary looms, LC1 EVO lambda kit MAYA EVO license.
GP1 EVO programming kit Stage 3: GP1 EVO ECU programming kit. It includes: necessary looms, LC1 EVO lambda kit MAYA Advanced license.
Programming and datalogging kit 1 Livel: Programming and datalogging kit Includes LC1EVO, M40 STD datalogger, MAYA EVO software license, connecting looms (Cod. GL-0016-AA + Cod. GL0017-AA + Cod. GL-0018-AA) for all available applications
Programming and datalogging kit 2 Livel: Programming and datalogging kit Includes LC1EVO, M40 STD datalogger, MAYA Advance software license, connecting looms (Cod. GL-0016-AA + Cod. GL0017-AA + Cod. GL-0018-AA) for all available applications
Replacement ECU: GP6 EVO for Honda CBR 600 RR MY 2008-2013 (suitable for standard and/or HRC configuration) Map Pre-installed (P&P interface Harness sold seperatly)- RACING USE ONLY
Replacement ECU: GP6 EVO for Honda CBR 1000 RR MY 2008-2012 (suitable for standard and/or HRC configuration) Map Pre-installed (P&P interface Harness sold seperatly)- RACING USE ONLY
Secondary injection kit : secondary injection kit for KM3 EVO. It includes: fuel injector, fuel rail, mount bracket. Fully Plug & Play with GL-0055-AA loom.
GET Injector
WIFI-COM for ECULMB, ECUJ5, GP2-EVO (Device only)
WIFI-COM for GP1/RX1 EVO + RX1 POWER (Device+connecting cable)
WIFI-COM for GP1/GP2-POWER (Device+connecting cable)
P&P Harness ECU GP2 EVO for ATV YAMAHA 450 YFZ
GP1 EVO expansion cable (frontal ECU's): GP1 EVO cable for ECU's installed behind the number plate. It allows direct connection of externals (optionals) sensors like: lambda modules, speed sensors, quick shifter sensors, MAP switch.
GP1 EVO expansion cable (central ECU's): GP1 EVO cable for ECU's installed in the center of the frame. It allows direct connection of externals (optionals) sensors like: lambda modules, speed sensors, quick shifter sensors, MAP switch.

Interface loom: Accessory Cable to update the VT1 firmware with the Standard loom cod. GL-0027-AA
Switch loom: Expansion cable for GP1 EVO ECU's. It makes fast and easy interfacing GP1 EVO to the MAP switch (ECU in the center of the frame).
Switch loom: Expansion cable for GP1 EVO ECU's. It makes fast and easy interfacing GP1 EVO to the MAP switch (ECU behind the number plate).
Accessory Cable to Programm the Ecu Get, LC1 and VT1 and the Standart loom GL-0023-AA Programming cable: GP1 EVO programming cable with serial connector
P&P interface loom: GP1 EVO plug & play interface loom for HUSQVARNA TC 250 2011
P&P interface loom: GP6 EVO plug & play interface loom for HONDA CBR600 RR and CBR1000 RR MY 2009-2010 (suitable also on HRC and MOTO 2 configurations)
P&P interface loom: plug & play interface for Yamaha T-MAX 2008-2011 (replacement part)
Zero TPS loom: 0 TPS - Setting Cable (Replacement)
P&P interface loom: plug & play interface for HONDA NSF250R (replacement part)
Interface loom: 2nd Injector loom for ECU in frontal Position
Interface loom: 2nd Injector loom for ECU in central Position
WiFI-COM connecting cable for GP1-EVO/RX1-EVO/RX1-PWR/ECULMB/GP2 EVO
WiFI-COM connecting cable for GP1-POWER
2nd Injector Loom for YAMAHA 2014-2016
2nd Injector Loom for KTM 250 2015; HUSQ 250/350 2015
Loom for Map Switch (Yamaha R3/R25/MT125)
Loom for Map Switch, Quick Shifter (Yamaha R3/R25/MT125)
Programming cable for GET CDIs 2 stroke
Power Supply Cable for GET WifiCOM
GP1 EVO Mount bracket: GP1 EVO support bracket for Sukuki RMZ 450 2008-2012
GP1 EVO Mount bracket: GP1 EVO support bracket for Kawasaki KXF 250/450 2009-2012
Mount bracket: GPA SWITCH mount bracket
Mount bracket: KM3 EVO mount bracket for HONDA NSF250R
Mount for GP1 EVO for Honda CRF 450 2013-16/CRF 250 2014-16
LC-GPA Support Bracket
ANTENNA GPS MK-76E 0,5 MT SMA
Quick shifter sensor: quck shifter sensor for Honda CRF 450 (requires BASIC or PRO expansion cable)
Quick shifter sensor: quck shifter sensor for YAMAHA YZF 450 (requires BASIC or PRO expansion cable)
Quick shifter sensor (pull type): quck shifter sensor for HONDA NSF250R. Plug & Play for GL-0055-AA loom
Quick shifter sensor (push type): quck shifter sensor for HONDA NSF250R. Plug & Play for GL-0055-AA loom
Quick Shifter KIT for YAMAHA R3/R25 & KTM RC390 (STD gearshift - Compression Sensor)
Quick Shifter for YAMAHA R3/R25 & KTM RC390 (REVERSE gearshift - Traction Sensor)
K-TYPE THERMOCOUPLE SENSOR BINDER + CONDITIONING FOR MD3
Head Performance Modification: Clean, Shot Peening, Performance Modification, Valve Seat Modification, Assemble, Check Clearance.
Beryllium copper valve seat: Beryllium copper valve seat insert + installation
EVO License for GP1: Cable for prog. + software for ECU programming
Advanced LICENSE for GP1: Cable for prog. + USB Advanced key for enabling Advanced functions(EVO functions but in plain text + phases + throttle pos. Deriv.)
Inductive coil: inductive coil for Suzuki RMZ 450 2008-2010 and Kawasaki KXF 450 2009-2010
Inductive coil: inductive coil for Suzuki RMZ 250 2010
GP1 EVO Mount bracket: GP1 EVO support bracket for Yamaha YZF450 2010-2012
MAP 1-2 Switch: injection MAP selector (requires BASIC or PRO expansion cable)
Handlebar switch: Handlebar switch labelled ON OFF
Connector : 64 Way female interface connector for ECUH-HPUH2-HPUH3-HPUH4-HPUH5-GP6 EVO-KM3 EVO (pins included).
48 way female interface connector for ECUG-HPUK1-HPUK2-GP2 ECU (pins included)
Programming interface for GPX
USB-Serial adapter: USB to serial interface for programming cable cod. PL00130000 (required for PC without serial port 9-way connector).
DATA expansion cable: GP1 EVO expansion cable for Suzuki RMZ450 09-10 ,Kawasaki KXF 450 09-10,Yamaha YZF 450 10. Allows direct connection to data acquisition system (Can + power + PC)
DATA expansion cable: GP1 EVO data cable for Honda CRF 250 2010 Honda CRF450 2009-2010, Suzuki RMZ 250 2010. It allows fast and easy connections of data acquisition system and PCs(Can + power + PC)
BASIC expansion cable: GP1 EVO cable for SuzukiMZ 450 2009-2010, Kawasaki KXF 450 2009-2010, Yamaha YZF 450 2010. It allows connections of MAP switch and quick shifter sensor to GP1 EVO ECU's
BASIC expansion cable: GP1 expansion cable for Honda CRF 250 2010 , Honda CRF 450 2010, Suzuki RMZ 250 2010. It allows connections of MAP switch and quick shifter sensor to GP1 EVO ECU's.
PRO expansion cable: GP1 EVO expansion cable for Suzuki RMZ 450 2009-2010, Kawasaki KXF 450 2009-2010, Yamaha YZF 450 2010-2012. Allows direct connection of externals (optionals) sensors like: lambda modules, speed sensors, quick shifter sensors, MAP switch.
PRO expansion cable: GP1 EVO cable for Honda CRF 250 2010, Honda CRF450 2009-2010, Suzuki RMZ 250 2010. Allows direct connection of externals (optionals) sensors like: lambda modules, speed sensors, quick shifter sensors, MAP switch.
Quick shifter sensor: quck shifter sensor for Honda CRF 450 (requires BASIC or PRO expansion cable)
Quick shifter sensor: quick Shifter Sensor (Traction mode). It requests Cabel for GP6 EVO
Quick shifter sensor: quick Shifter Sensor (Compression mode). It requests Cabel for GP6 EVO
Quick shifter sensor: quck shifter sensor for Suzuki 450 RMZ (requires BASIC or PRO expansion cable)
DB - Killer - ENDURO VERSION (Fits All Model)
DB - Killer - MX VERSION (Fits All Model)
Assembly KIT (Springs, Spacers, Bolts) - Honda 250 CRF 2011-13
Silencer End-Cap (Fits All Model) (Includes Rivets)
Exhaust Head Pipe Complete - Honda 250 CRF 2011-13 (No Fitting Material)
Exhaust Head Pipe Complete - Suzuki 250 RMZ 2011-13 (No Fitting Material)
Exhaust Head Pipe Complete - Kawasaki 250 KXF 2012-13 (No Fitting Material)
Exhaust Head Pipe Complete - KTM 250 SXF-2011-12 - EXC-F 2011-13 (No Fitting Material)
Exhaust Head Pipe Complete - KTM 350 SXF 2011-12 - EXC-F 2011-13 (No Fitting Material)
Silencer Complete - Honda 250 CRF 2011-13 (Inclusive Support KIT, MX-DB Killer) (No Fitting Material)
Silencer Complete - Suzuki 250 RMZ 2011-13 (Inclusive Support KIT, MX-DB Killer) (No Fitting Material)
Silencer Complete - Kawasaki 250 KXF 2012 (Inclusive Support KIT, MX-DB Killer) (No Fitting Material)
Silencer Complete - KTM 250 SXF 2011-12 - EXC-F 2011-13(Inclusive Support KIT, MX-DB Killer) (No Fitting Material)
Silencer Complete - KTM 350 SXF 2011-12 - EXC-F 2011-13(Inclusive Support KIT, MX-DB Killer) (No Fitting Material)
Exhaust Silencer Re-Packing Kits (Glass mat, Rivets) - 450mm x 1300mm - KTM (250&350)
Exhaust Silencer Re-Packing Kits (Glass mat, Rivets) - 400mm x 1300mm - HONDA, SUZUKI, KAWASAKI, YAMAHA
Silencer Complete - KTM 250 SXF 2013 (Inclusive Support KIT, MX-DB Killer) (No Fitting Material)
Exhaust Head Pipe Complete - KTM 350 SXF 2013 (No Fitting Material)
Silencer Complete - Kawasaki 250 KXF 2013 (Inclusive Support KIT, MX-DB Killer) (No Fitting Material)
Exhaust kit for Honda 250 CRF 2011-12 (inclusive Fixing, MX-dB Killer)
Exhaust kit for Suzuki 250 RMZ 2011-12 (inclusive Fixing, MX-dB Killer)
Exhaust kit for Kawasaki 250 KXF 2012 (inclusive Fixing, MX-dB Killer)
Exhaust kit for KTM 250 SXF 2011-2012 (inclusive Fixing, MX-dB Killer)
Exhaust kit for KTM 350 SXF 2011-2012 (inclusive Fixing, MX-dB Killer)
Exhaust kit for KTM 250 EXC-F 2011-13 (Inclusive Fixing, ENDURO-DB Killer)
Exhaust kit for KTM 350 EXC-F 2011-13 (Inclusive Fixing, ENDURO-DB Killer)
Titanium Lambda Sensor Welding Bung + Plug + Seal
Exhaust kit for KTM 250 SXF 2013 (inclusive Fixing, MX-dB Killer)
Stainless Lambda Sensor Welding Bung + Plug + Seal
Exhaust kit for Kawasaki 250 KXF 2013 (Inclusive Fixing, MX-DB Killer)
Exhaust kit for KTM 350 SXF 2013 (inclusive Fixing, MX-dB Killer)
Assembly KIT (Springs, Spacers, Bolts) - Suzuki 250 RMZ 2011-13 & Kawasaki 250 KXF 2013
Assembly KIT (Springs, Spacers, Bolts) - KTM 250 SXF- EXC-F 2011-13
Assembly KIT (Springs, Spacers, Bolts) - KTM 350 SXF- EXC-F 2011-13
Assembly KIT (spring,spacer,bolts) Honda 450 CRF 2014-2015
Assembly KIT (spring,spacer,bolts) Yamaha 250 YZF 2014-15
Exhaust Silencer Sticker
HC PISTON KIT SUZUKI 250 RMZ 2013, HC Piston + Gasket Kit
HC PISTON KIT : KAWASAKI 250 KXF 2013, HC Piston + Gasket Kit
HC PISTON : for HONDA 250 CRF 2013 (pin and seal rings included)
HC PISTON : for SUZUKI 250 RMZ 2013 (pin and seal rings included)
HC Piston : for KAWASAKI 250 KXF 2013 (pin and seal rings included)
CAMSHAFT KIT : cam kit for KAWASAKI 250 KXF 2013
CAMSHAFT KIT : cam kit for SUZUKI 250 RMZ 2013
CAMSHAFT KIT : cam kit for HONDA 250 CRF 2013
CAMSHAFT : cam & bearing ready fitted for HONDA 250 CRF 2013
CAMSHAFT : cam & bearing ready fitted for SUZUKI 250 RMZ 2013
CAMSHAFT : cam & bearing ready fitted for KAWASAKI 250 KXF 2013
VALVE SPRINGS : HONDA 250 CRF 2013 (2-intake retainers, 2-exhaust retainers, 4-spring bases, 4-prs of springs, 4-seals)
VALVE SPRINGS : SUZUKI 250 RMZ 2013(2-intake retainers, 2-exhaust retainers, 4-spring bases, 4-prs of springs, 4-seals)
VALVE SPRINGS : KAWASAKI 250 KXF 2013(2-intake retainers, 2-exhaust retainers, 4-spring bases, 4-prs of springs, 4-seals)
GASKET KIT : gasket kit for HONDA 250 CRF 2010-2013 (Top End Gaskets Kit, without Valve Cover Gasket)
GASKET KIT : gasket kit for KAWASAKI 250 KXF 2009-2013 (Top End Gaskets Kit, without Valve Cover Gasket)
HC PISTON KIT : HONDA 250 CRF 2013, HC Piston + Gasket Kit
Wintax - Data Manager License Upgrade: Data Manager upgrade and WINTAX V4 GET Data Software by Magneti Marelli (USB KEY)
Battery charger: battery charger with Binder connector
Support bracket: aluminium Mount for MD3 (needs Customisation to the Vehicle)
BINDER MALE 4 PIN CONNECTOR
BINDER FEMALE 3 PIN CONNECTOR
BINDER MALE 3 PIN CONNECTOR
DTM FEMALE 2 PIN CONNECTOR
AUTOSPORT MALE 13 PIN CONNECTOR
AUTOSPORT FEMALE 37 PIN CONNECTOR
37 PIN FEMALE AUTOSPORT CONNECTOR (COUNTERPART FOR M1-EVO-RS AND M1-EVO-ALU)
Battery pack: Battery with binder connector
GPS ANTENNA WITH QUICK CONNECTION FOR M1-EVO-ALU
MD3 EVO DASHBOARD 2009 (HARNESS AND GPS ANTENNA INCLUDED BUT NO INTERFACE)
M1-EVO-ALU LOGGER WITH ALUMINIUM CASE (WITH GPS ANTENNA AND MX2 SOFTWARE, NO HARNESS)
LC2 LAMBDA KIT INCLUDING HARNESS
Datalogger MD3 EVO: MD3 EVO PRO Datalogger\dashboard. Counterpart 55 PIN connector and GPS antenna are included (NO HARNESS)
Harness : harness for MD3 SERIES (spare part or extra harness)
TPS Signal Interface Connection Binder connector, to connect on TPS for M40 (Unconditioned)
USB CABLE FOR DATA DOWNLOAD WITH DTM CONNECTOR
Position sensor: linear position sensor (travel 75 mm) with Binder connector for MD3-M40
Position sensor: linear position sensor (travel 100 mm) with Binder connector for MD3-M40
Position sensor: linear position sensor (travel 150 mm) with Binder connector for MD3-M40
Position sensor: Magnetostrictive Suspension Sensor 150 mm (Carbon Case) Binder for MD3 (dS40010010 included)
Extension loom: H Expansion/Amplifier cable. It allows to fit analog sensors (that require 12V power supply while output voltage is between 0 to 5V) to the datalogger
Pressure sensor: Pressure sensor up to 10 bar (Binder connector)for MD3-M40
Pressure sensor: Pressure sensor up to 35 bar (Binder connector)for MD3-M40
Pressure sensor: Pressure sensor up to 100 bar (Binder connector)for MD3-M40
RPM interface: RPM signal data logging interface (require digital out to dash RPM meter)
TPS interface: TPS Signal interface for MD3-M40 (with Binder connector)
K-TYPE THERMOCOUPLE SENSOR BINDER + CONDITIONING FOR MD3
Infrared Temperature Sensor 150 Binder for M40
Temperature sensor: K-Type Temperature sensor with electronic conditioning circuit (connection to datalogger by 3 poles Binder connector)
Support bracket: D30 universal support bracket (needs customization for the vehicle )
Dash kit: D30-EVO Dashboard (Dash, main cable, allarm labels, universal s upport bracket, fitting material, SW interface)
D30-EVO Dashboard for YAMAHA R3/R25 (Dashkit + P&P HARNESS)
Support Braket: M40 support braket that allows to fit the datalogger to the fork (rubber band included)
Datalogger kit: M40 Standard data logging Unit (Can + 3 Analog + 2Digital) (GL-0038-AA, GPS Antenna, USB Cable, Software MX2)
Datalogger kit: M40 Expansion data logging Unit (Can + 6 Analog + 3Digital + 1 Beacon) (GL-0038-AA, GPS Antenna, 1 Channel Loom GL-0041-AA, USB Cable, Software MX2)
Datalogger kit: M40 Plus data logging Unit (Can + 9 Analog + 4Digital + 1 Beacon) (GL-0038-AA, GPS Antenna,2 Channel Loom -GL-0041-AA and GL-0042-AA-, USB Cable, Software MX2)
M40 Data Logging Unit (Can + 3 Analog + 2Digital) (GL-0038-AA, GPS Antenna, USB Cable, Software MX2) with GP1 EVO CAN setup
M40 Expansion Data Logging Unit (Can + 6 Analog + 3Digital + 1 Beacon) (GL-0038-AA, GPS Antenna, 1 Chanell Loom GL-0041-AA, USB Cable, Software MX2) with GP1 EVO CAN setup
M40 Plus Data Logging Unit (Can + 9 Analog + 4Digital + 1 Beacon) (GL-0038-AA, GPS Antenna, 2 Channels Loom GL-0041-AA and GL-0042-AA, USB Cable, Software MX2) with GP1 EVO CAN setup
Powerkit: kit for M40 (connected to GP1 EVO ecu). The datalogger can be powered without starting the engin. Includes: GL-0037-AA, Battery Pack and Battery Charger.
Powerkit: kit for M40 (general use - without GP1 EVO ecu). Includes: GL-0039-AA, Battery Pack and Battery Charger
Position sensor: Magnetostrictive Suspension Sensor 350 mm (Carbon Case) Binder for M40 inclusive dS40010010
Position sensor: Magnetostrictive Suspension Sensor 150 mm (Carbon Case) Binder for M40 inclusive dS40010010
Position sensor: Magnetostrictive Suspension Sensor 75 mm (Carbon Case) Binder for M40 inclusive dS40010010
Multilink cable: Expansion cable for GP1 EVO ECU's. It makes fast and easy interfacing GP1 EVO to: M40 datalogger, VT1, PC, LC1 EVO Lambda kit.
Data cable: USB Data download Cable
Extension Loom: required to extent connections of GP1 or M40 or LC1
Accessorie Loom: loom with CAN exit on 4 poles Binder. Suitable for GP1 EVO/LC1/M40, it allows to connect multiple devises in CAN Bus
Power loom: it allows to power on an M40 connected to a GP1EVO ecu (no connector on PWR IN side)
Power Loom: it allows to power on an M40 connected to a GP1EVO ecu (Binder conector on PWR IN side)
Power Loom: loom for M40 with CAN and Power inputs (no connectors on PWR IN side and CAN side)
Power Loom: M40 loom with CAN and power inputs for generic use (PWR In side with 4 poles Binder connector, CAN IN side without connector)
Expansion Loom: Channel Expansion Loom (3 Analogue + 2 Digital) JST M40 - Binder Sensor (AD1-3 / IC1-2)
Expansion loom: Channel Expansion Loom (3 Analogue + 1 Digital + 1 SW) JST M40 - Binder Sensor (AD4-6 / IC3 / 1SW)
Expansion loom: Channel Expansion Loom (3 Analogue + 2 Digital) JST M40 - Binder Sensor (AD7-9 / IC4-5)
Interface loom: D30 Main cable (for generic applications)
D30-EVO Expansion harness (JST Connector for GP1EVO/GP6EVO ECU)
D30-EVO AUX Expanision Cable
D30-EVO Expansion harness for YAMAHA R3/R25
GET ECUs quick shifter
SMART CABLES FOR GET JUMP STARTER

Athena S.p.a Via delle Albere, 13 - 36045 Alonte (Vi) - Italy - Tel. +39 0444 727272 - Fax. +39 0444 727292 Email: - Privacy | Note legali
P.IVA E C.F. 00589040245 | R.E.A. VI-139951 | Capitale Sociale € 10.000.000 I.V. | Numero iscrizione Registro AEE: IT12010000007393
feed rss